AVK DISMANTLING JOINT, PN16
Mild steel, reduced number of tie rods in steel 4.6, DN50-1600
Contact
AVK International A/S
Bizonvej 1, Skovby, 8464 Galten, Denmark
Dismantling Joint of mild steel, PN16. For water and wastewater -10° C to +70° C. Insulation essential for temperatures of 0° C and below.
AVK dismantling joints provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps. The dismantling joints compensate for axial displacement of the pipe during installation and dismantling.
| Variant 265/30-002 | |
|---|---|
| Connection: | Flanged |
| Material: | Steel |
| DN: | DN50 - DN1600 |
| PN: | PN16 |
Features
- Cost effective installation and dismantling with only a few tie-rods
- Compensates for axial displacement of the pipe during installation and dismantling as the telescopic action between the inner and outer flange body allows for longitudinal adjustment
- Designed with a gland ring arrangement to apply compression on the seal
- Standard axial adjustment of ±60 mm
- Angular deflection:
<DN600mm is +/- 4°
DN700 & 800 is +/- 3°
DN900 & 1200 is +/- 2° - Mild steel with fusion bonded epoxy coating to WIS 4-52-01
- Studs, nuts and tie-rods of zinc plated and passivated steel 4.6
- Optionally with studs, nuts and tie-rods of stainless steel A2 or acid-resistant stainless steel A4
- Optionally PN 25
- Option of any drilling within design tolerance
- Notice: Tie-rods provide end load capabilities for maximum working pressure / maximum unbalanced pressure up to max 16 bar.
Downloads
Datasheet
Certificate(s)
Installation, Operation & Maintenance
Reference nos. and dimensions:
Scroll for more info
| AVK ref. no. | DN mm |
Flange drilling |
D mm |
E mm |
L mm |
L8 mm |
L11 mm |
Bolt No. |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|
| 265-30-0050-11 | 50 | PN10/16 | 165 | 125 | 330 | 30 | 200 | M16 | 11 |
| 265-30-0080-11 | 80 | PN10/16 | 200 | 160 | 330 | 30 | 200 | M16 | 15 |
| 265-30-0100-11 | 100 | PN10/16 | 220 | 180 | 330 | 30 | 200 | M16 | 19 |
| 265-30-0150-11 | 150 | PN10/16 | 285 | 240 | 330 | 30 | 200 | M20 | 26 |
| 265-30-0200-11 | 200 | PN16 | 340 | 295 | 430 | 40 | 280 | M20 | 30 |
| 265-30-0250-11 | 250 | PN16 | 405 | 355 | 430 | 40 | 280 | M24 | 43 |
| 265-30-0300-11 | 300 | PN16 | 460 | 410 | 575 | 60 | 360 | M24 | 68 |
| 265-30-0350-11 | 350 | PN16 | 520 | 470 | 575 | 60 | 360 | M24 | 80 |
| 265-30-0400-11 | 400 | PN16 | 580 | 525 | 585 | 60 | 360 | M27 | 104 |
| 265-30-0450-11 | 450 | PN16 | 640 | 585 | 585 | 60 | 360 | M27 | 121 |
| 265-30-0500-11 | 500 | PN16 | 715 | 650 | 605 | 60 | 360 | M30 | 149 |
| 265-30-0600-11 | 600 | PN16 | 840 | 770 | 625 | 60 | 360 | M33 | 186 |
| 265-30-0700-11 | 700 | PN16 | 910 | 840 | 625 | 60 | 360 | M33 | 203 |
| 265-30-0800-11 | 800 | PN16 | 1025 | 950 | 645 | 60 | 360 | M36 | 233 |
| 265-30-0900-11 | 900 | PN16 | 1125 | 1050 | 645 | 60 | 360 | M36 | 261 |
| 265-30-1000-11 | 1000 | PN16 | 1255 | 1170 | 665 | 60 | 370 | M39 | 356 |
| 265-30-1200-11 | 1200 | PN16 | 1485 | 1390 | 665 | 60 | 370 | M45 | 481 |
| 265-30-1600-11 | 1600 | PN16 | 1930 | 1820 | 975 | 60 | 370 | 10 | 713 |
2D/3D drawings
Enquiry
Scroll for more info
Components
| 1. | Flange | Steel S235/275 JR / Ductile Iron GJS-400-15 |
| 2. | Gland ring | Steel S275JR / Ductile Iron GJS-400-15 |
| 3. | Body | Steel S275JR / Ductile Iron GJS-400-15 |
| 4. | Seal | EPDM rubber |
| 5. | Stud, nut and washer | Steel gr. 8.8, zinc plated, passivated |
| 6. | Tie-rod, nut and washer | Steel gr. 4.6, zinc plated, passivated |
Test/Approvals
- Type tested to 1.5 X PN
- WRAS approved materials
Standards
- Standard flange drilling to EN1092-2 (ISO 7005-2), PN16
