AVK GATE VALVE, FLANGED, PN10/16

EN 558-2 S.14/DIN F4, ISO top flange, EPDM, DN40-400

AVK headquater in Skovby Galten, Denmark

Contact

AVK International A/S

Bizonvej 1, Skovby, 8464 Galten, Denmark

Flanged gate valve EN 558-2 S.14/DIN F4 prepared for actuator. For drinking water and neutral liquids to max. 70°C

AVK gate valves are designed with built-in safety in every detail. The wedge is fully vulcanized with AVK’s own drinking water approved EPDM rubber compound. It features an outstanding durability due to the ability of the rubber to regain its original shape, the double bonding vulcanization process and the sturdy wedge design. The triple safety stem sealing system, the high strength stem and the thorough corrosion protection safeguard the unmatched reliability.

Variant 15/42-0035
Connection: Flanged
Material: Ductile Iron
DN: DN40 - DN400
PN: PN16
Closing direction: Clockwise to Close

Features

  • Fixed, integral wedge nut prevents vibration and ensures durability
  • Fully vulcanized wedge and guide rails fitted with wedge shoes prevent corrosion
  • Large conical stem hole in the wedge prevents stagnant water
  • Stainless steel stem with wedge stop and rolled threads for high strength
  • Full circle thrust collar provides fixation of the stem and low free running torques
  • Triple safety stem sealing with an NBR wiper ring, a polyamide bearing with four NBR O-rings, and an EPDM rubber manchette
  • Round EPDM bonnet gasket fixed in a recess
  • Countersunk and sealed stainless steel bonnet bolts encircled by the bonnet gasket
  • Full bore
  • Low operating torque
  • Fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901
  • ISO top flange with bolts of stainless steel

Downloads

Datasheet
Related Datasheets
Appendix
Certificate(s)
Installation, Operation & Maintenance

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm
Flange
drilling
L
mm
H
mm
H1
mm
H3
mm
Ød1
mm
D2
mm
Torque
Nm
Turns
to open
Actuator
Flange
Theoretical
weight/kg
15-040-40-016 40 PN10/16 140 241 202 316 20 M6 40 11 F10 13
15-050-40-016 50 PN10/16 150 241 202 324 20 M6 40 11 F10 14
15-065-42-016 65 PN10/16 170 278 227 371 20 M6 60 14 F10 17
15-080-42-01464099 80 PN10/16 180 284 247 384 20 M6 35 17 F10 15
15-100-42-01464099 100 PN10/16 190 311 270 421 20 M6 35 21 F10 18
15-125-42-01464099 125 PN10/16 200 352 311 477 20 M6 40 26 F10 22
15-150-42-01464099 150 PN10/16 210 408 365 550 20 M6 40 26 F10 31
15-200-42-00464099 200 PN10 230 507 456 677 20 M6 80 33 F10 49
15-200-42-01464099 200 PN16 230 507 456 677 20 M6 80 33 F10 49
15-250-42-006 250 PN10 250 617 555 817 30 M8 180 37 F14 113
15-250-42-016 250 PN16 250 617 555 817 30 M8 180 37 F14 113
15-300-42-006 300 PN10 270 691 630 919 30 M8 200 44 F14 160
15-300-42-016 300 PN16 270 691 630 919 30 M8 200 44 F14 160
15-350-40-006 350 PN10 290 907 800 1167 30 M8 300 59 F14 223
15-350-40-016 350 PN16 290 907 800 1167 30 M8 300 59 F14 223
15-400-40-006 400 PN10 310 951 860 1241 30 M8 300 59 F14 243
15-400-40-016 400 PN16 310 951 860 1241 30 M8 300 59 F14 243
BIM drawings
2D/3D drawings
Enquiry
Scroll for more info

Components

1. Stem Stainless steel 1.4104 (430F)
2. Mounting flange Ductile iron GJS-500-7 (GGG-50)
3. Stem seal nut Brass, DZR CW602N
4. Wiper ring NBR rubber
5. Seal NBR rubber
6. O-ring NBR rubber
7. Thrust collar Brass, DZR CW602N
8. Manchette EPDM rubber
9. Bonnet Ductile iron GJS-500-7 (GGG-50)
10. Bonnet bolt Stainless steel A2, sealed with hot melt
11. Bonnet gasket EPDM rubber
12. Wedge nut Brass CW724R Si-alloy
13. Wedge Ductile iron, EPDM encapsulated
14. Body Ductile iron GJS-500-7 (GGG-50)
15. Wedge shoe Polyamide

Test/Approvals

  • Hydraulic test according to EN 1074-1 and 2 / EN 12266 |
  • Seat: 1.1 x PN (in bar), Body: 1.5 x PN (in bar). Operation torque test
  • Approved for drinking water
  • Approved according to ACS Certificate 18 ACC NY 369

Standards

  • Designed according to EN 1074 part 1 & 2, Designed according to EN 1171
  • Face-to-face dimension according to EN 558 Table 2 Basic Series 14
  • Standard flange drilling to EN1092-2 (ISO 7005-2), PN10/16
0 Files In the package