A fully welded AVK PE pipe system installed - it offers a lot of benefits such as reduced risk of leakage, ease of installation and a high durability

AVK gate valves with PE ends for a fully welded PE pipe system

A fully welded PE pipe system offers a lot of benefits such as reduced risk of leakage, ease of installation and a high durability. With AVK gate valves with pre-mounted PE pipe ends you can design a fully welded pipe system up to 630 mm.

Advantages of PE pipes within water supply

For most applications, PE (polyethylene) pipes have advantages over pipes of more traditional materials like PVC or cast iron. Primarily it gives you a fully welded pipe system with no bolts, no mechanical joints and thereby a much lower risk of leakage and defects.

The PE pipes have an extended service life compared to traditional pipe materials. The pipes are corrosion resistant and as they are relatively light weighted, the PE pipes are easy to handle and transport.

The fusion and electro welding processes provide a joint which is as strong as the pipe itself and allow for the pipes to be welded above ground, rather than in the trench, for easy installation. In addition, PE pipes can be installed in a trench, which is not in level. There is no need to level the soil in the trench, as the PE pipes are flexible and follow the terrain. Furthermore, there are no special requirements for the soil conditions and less space is needed in the trench for the installation. PE pipes can also be used for installations submerged under water and they are typically the preferred choice for relining or pipe cracking applications. Finally, the soft PE material allows the pipes to be squeezed together for a temporary shut-off during repair.

AVK gate valves with PE ends for a fully welded PE pipe system

A fully welded PE pipe system – up to 630 mm with AVK valves

The advantages of using PE pipes are many and so are those of using valves with pre-mounted PE pipe ends as part of your PE pipe system. Most importantly, the valves with PE pipe ends will be an integrated part of the PE pipe system. There will be no mechanical couplings and thus no risk of bolts coming loose and causing couplings or flanges to leak if the ground settles around the valve.

Same approvals and welding parameters for the entire system

To obtain the full advantage, the PE pipe ends on the valve must though be made of the same PE material as the PE pipes used in the installation. When using the same PE material for both valves and pipes, the same welding parameters can be used for all joints and costly mistakes during installation can thereby be avoided. And not least, the same PE pipe approvals will be valid throughout the entire system. 

AVK gate valves with PE ends can be fully integrated

Our valve design allows us to mount all standard PE pipes on the valves. When using AVK valves, you can therefore obtain a pipe approval that covers the entire PE network including valves. The extra-long pipe ends even leave room for an additional weld, if needed.

The demand for PE pipe systems has increased due to the obvious benefits. Due to global climate change and water scarcity, water must be transported over long distances, and therefore the demand for PE pipe systems in large sizes is also on the rise. To accommodate this, AVK gate valves with PE pipe ends for water supply are available for pipe sizes 75 mm to 630 mm.

AVK gate valve with PE ends for a fully welded PE pipe system
AVK gate valves with PE ends for a fully welded PE pipe system

Renowned AVK valve design – as tight as the pipe itself

The boltless, full bore PE end connection is fully tensile resistant and designed to meet all the criteria specified in DVGW G5600-1. In our production process a piece of standard PE pipe is pressed directly onto the grooved valve end, and the grooves combined with a sleeve around the valve/pipe connection ensure that the PE pipe material is firmly secured and that the connection remains tight and tensile during the entire service life of the pipeline. The connection is sealed with a shrink hose to provide corrosion protection.

AVK gate valves – the safe choice

AVK valves comply with the highest standards and hold worldwide drinking water approvals for coating, rubber and brass materials and for the valve itself. Read more in the article Total Cost of Ownership.

Valves for any need

We offer many variants of gate valves with PE ends. Our standard types for water applications are PE end X PE end available with stainless steel stem, with duplex stem and as Premium 100 valves. We also offer valves for easy and cost efficient transition from other pipe materials to PE pipe. Our valves with PE end X Supa Maxi™ end offer a combination of two great designs with the Supa Maxi™ universal tensile coupling end for all types of pipes, and valves with PE end X flange offer a flange connection to all types of flanged fittings and pipes.

Digital monitoring of valve open/close position

VIDI Positioner is a battery-operated AVK Smart Water device that detects in percentages how much a gate valve is open. That way it is easy to detect if valves are rightfully opened or closed, which will increase reliability of flow and pressure measurements in the distribution network.

The AVK Smart Water concept consists of battery-operated, wireless IoT sensors for remote monitoring and data collection directly from applications in the distribution network. Data can be integrated into any preferred IT system which makes it easy to compile a complete overview of the network.

New AVK series 36 gate valves with PE ends. Now even bigger! - thumbnail

Video

Gate valves for a fully integrated PE pipe system

Join us for a tour around our factory where we manufacture AVK gate valves with PE ends.

AVK product brochure about gate valves with PE ends

Download

Gate valves with PE ends

Learn about the benefits of using gate valves with PE ends and get an introduction to our wide range.
AVK gate valves with PE ends thumbnail

Animation

Gate valves with PE ends

Animation showing the application and benefits of our range of gate valves with PE ends.