Flowing water

Managing non-revenue water (NRW)

With high levels of non-revenue water in many parts of the world, vital resources are wasted every second. It is a global challenge, and it is detrimental to both the economics of water utilities and to the environment when water is lost, and even more water needs to be produced and distributed.

Access to clean water is in many places taken for granted, just like the fresh air we breathe. We forget that clean water is a product, and that producing water is a comprehensive, detailed process. And resources are scarce. Water scarcity is a global issue caused by many different factors such as climate changes, population density and water management practices, and is thus particularly critical in some areas. When the distribution management is then inadequate at the same time, we are faced with a more invisible, yet crucial problem: water loss, also referred to as non-revenue water, or NRW.

What is non-revenue water?

Non-revenue water (NRW) is basically produced, cleaned water which is lost somewhere in the water distribution system, never reaching the consumers. This is a waste of precious water resources, and water that is produced and lost without generating any revenue has negative financial as well as environmental impact. The production costs and the energy used to produce and distribute the water are wasted. And when a significant amount of water is lost, it means that more water needs to be produced and once again be distributed.

Non-revenue water

Non-revenue water is a global challenge

The problem is universal, ranging from NRW levels of about 5 % to as much as 80 % in certain areas.

Global water loss has been estimated to 126 billion cubic metres per year, equivalent to the cost of $39 billion each year. Could these water losses be reduced by only one-third, the savings would be enough to supply 800 million people (Liemberger & Wyatt, 2018).

European thresholds on leakage rates

Sustainable water supply is on the international political agenda, among other things with the European Drinking Water Directive. The purpose of the directive is to ensure safe and clean drinking water for all Europeans. It concerns materials in contact with the drinking water and limit values to be accepted in water distribution, and it focuses on risk management and lowering water loss.

To increase investment in maintenance and renewal of the drinking water infrastructure and thereby reduce water loss, the European Commission will by 2028 have adopted a threshold on allowed leakage rates. Member states who exceed this will have to present an action plan within two years from then. It is therefore not only of local interest to reduce NRW levels but may soon also be a legal requirement.

What are the causes of non-revenue water?

The causes of water losses are many, ranging from leakages, pipe bursts, and poor water management to illegal connections and unauthorised consumption.

Leakages and pipe bursts

Leakages cause water loss from the pipe network and occur, among other things, at pipe bursts. This means that cleaned water is lost and never reaches the consumers. Water loss due to leakages is a waste of resources and affects both the performance of the utilities and the consumers by possible nuisances. Leakages and pipe bursts can occur suddenly or gradually develop over time due to lack of maintenance, corrosion or wear and tear.

Inadequate water management

In many parts of the world, inadequate management of water resources contributes to water loss. This may, for example, be lack of maintenance of the supply network resulting in leakages and pipe bursts, or lack of customer meters, so that the utilities cannot bill the consumers based on actual consumption.

Unauthorised consumption

Theft of water or filling of a vacuum tanker from a random fire hydrant not assigned for the purpose are examples of unauthorised consumption that increases the amount of non-revenue water. 

Dividing the network into district metering areas

Operating a water distribution network is no easy task. A network often covers an extensive area and a complex, hidden system of pipes, making it difficult to detect changes, damages or illegal connections.

Dividing the supply network into smaller sections – district metering areas (DMA) – is a more efficient technique for NRW management. DMAs provide the ability to measure water balance and to secure low pressure for each section separately. Operators are then able to better plan and prioritise their efforts, and this way, dividing your network into DMAs can optimise the efficiency of the entire network and result in considerable operating and maintenance cost savings as well as reduced water loss.

AVK solutions for optimising district metering areas (DMAs)

AVK solutions for optimising DMAs and reducing non-revenue water

Regulating valves and pressure management

Regulating valves allow for pressure control in the supply network. A low pressure will reduce water loss through existing leakages and reduce the risk of pipe bursts. We offer a wide selection of regulating valves in several variants and configurations:

Dynamic pressure management provides a constant pressure for a critical area such as a tall building, an area with old pipes or the area in the supply network with the most pressure fluctuations. This way, you can ensure a low average pressure which reduces water loss through existing leakages. You can also minimise pressure fluctuations, which will extend the life span of your network due to less pipe stress and thereby reduce the risk of water loss through pipe bursts. AVK solutions for pressure management:

Learn more about the advantages of pressure management in the supply network, and how this is helpful in reducing water loss and NRW levels.

Battery-operated IoT sensors

Data can be collected directly from the distribution network via wireless, battery-operated IoT sensors and help detect water loss. With AVK Smart Water sensors you can save resources, optimise planning and operation activities and thereby reduce water loss:

  • VIDI Positioner for monitoring valve open/close position in percentages
  • VIDI Cap for monitoring fire hydrants
  • VIDI Pressure for monitoring pressure at DMA inlet and at critical points in the supply network
  • VIDI Flow for monitoring the amount of water entering a DMA, which enables reliable water balance calculations
  • VIDI Open/Close for indication of valve position: opened, closed or in between
  • VIDI Temperature for monitoring water temperature in the supply network
  • VIDI Level for measuring distance to the nearest surface for monitoring sand traps and wells

Network safety and pipe repair

Efficient leak repair minimises water loss from pipe cracks and bursts. We offer various repair collars and clamps to secure fast, safe and efficient repair, and even for permanent repair under pressure

Selecting the right valves will allow water utilities to manage the distribution network efficiently. Preventing water hammer and air in the system will extend the lifespan of the network due to less pipe stress, and thereby also protect against pipeline bursts and water loss. We offer a wide selection of check valves and air valves for network safety:

Surface boxes for use with noise loggers

Leakages can easily be detected through noise loggers integrated in ground-level surface boxes, enabling operators to set in exactly when and where needed. This secures quick repair, meaning less water lost and a minimum disturbance of the network customers.

AVK offers a wide range of synthetic surface boxes, some of which allow storage of the necessary equipment for noise loggers, like microphone, software installation, battery and antenna. The surface boxes are available as a lockable version making it tamperproof.

See our wide range of synthetic surface boxes.

Download guideline about network safety

Selecting the right valves and accessories will allow water utilities to manage their networks more efficiently. The purpose of this guide is to help network operators and designers minimise the risk of network failure and prolong the lifespan of their assets.

Sectioning the distribution network with AVK

Animation

District Metering Areas

Dividing the supply network into smaller sections (DMAs) is an efficient technique for achieving cost savings and reducing water loss.

Case

Improve non-revenue water calculations and support active leakage control with VIDI Positioner

As part of the LEAKman project, VIDI Positioners are installed on sectioning valves to ensure reliable data for water balance and non-revenue water level calculations.

Brochure

Stop water losses

Denmark has the know-how and some of the best high-tech solutions for limiting non-revenue water, and an association of nine Danish partners representing technology providers, consultants, water utilities and the Technical University of Denmark has developed the LEAKman solution.

At large-scale demonstration facilities, the solution is implemented in full-scale combining all available knowledge and technologies. The solution includes AVK regulating valves and Smart Water solutions.

Case

Large-scale project for efficient water supply management leads to million dollar savings

Georgian Water and Power has chosen AVK International to supply more than 500 pressure reducing valves to significantly improve and efficiently manage their water supply.